Toyota Forklift PRE200

To ensure that you work safely and to prevent accidents while working on a truck, remember the following:

• keep the area where servicing activities are performed clean. Oil or water will make the floor slippery.

• use the correct working position. Service activities often involve kneeling or bending forward.

Try sitting on a toolbox, for example, to relieve the strain on your knees and back.

• loose articles and jewellery may become trapped in the moving parts of the truck.

So never wear loose articles or jewellery while working on the truck.

• use the correct tools for the work you are carrying out.

• keep all tools well maintained.

To ensure that you work safely and to prevent accidents while working on a truck, remember the following:

Keep the area where servicing activities are performed clean. Oil or water will make the floor slippery.

Use the correct working position. Service activities often involve kneeling or bending forward. Try sitting on a toolbox, for example, to relieve the strain on your knees and back.

Loose articles and jewellery may become trapped in the moving parts of the truck. So never wear loose articles or jewellery while working on the truck.

Use the correct tools for the work you are carrying out.

Keep all tools well maintained.

Store and transport old oil according to applicable local regulations.

Do not flush solvents, etc. down the drain unless they are intended to be disposed of in this way. Follow the local disposal regulations.

Area where servicing activities are performed is clean

Correct working position is used

No loose articles or jewellery are worn while working on the truck

Correct tools are used for the work

Old oil is stored and transported according to applicable local regulations

No solvents are flushed down the drain unless they are intended to be disposed of in this way

Sanding or a paint stripper is used to remove the paint at least 100 mm around an area where any welding/grinding is to take place

Area where servicing activities are performed clean

No loose articles or jewellery worn while working on the truck

Correct tools used for the work

Old oil stored and transported according to applicable local regulations

No solvents flushed down the drain unless intended for disposal

Sanding or a paint stripper used to remove paint around welding/grinding area

Area where servicing activities are performed clean

No loose articles or jewellery worn while working on the truck

Correct tools used for the work

Old oil stored and transported according to applicable local regulations

No solvents flushed down the drain unless they are intended to be disposed of in this way

Heated paint gives off harmful gases