Get instant access to all the maintenance information you need. Empower technicians to perform preventive maintenance with asset packages, ready to use right out of the box.

Documents & Manuals

Find all the essential guides in one place.

Tensioning Guide
Belt-diagram
C-120 pulleys
+ 13 more

Work Order Templates

Pre-built workflows to keep your asset running smoothly.

Daily Electrical System Inspection
Replace Roller and Pulley
Install Engine B-120
+ 29 more

Procedures

Integrate maintenance plans directly into your work orders.

Motion Industries
Applied Industrial Technologies
Electrical Brothers
+ 5 more

Parts

Access the parts list for your equipment in MaintainX.

Drive Motor
B2 Rollers
Tensioning System
+ 40 more

Kaeser Screw Compressor BSD40

Create an account to install this asset package.

Maintenance Plans for Kaeser Screw Compressor Model BSD40

Integrate maintenance plans directly into your work orders in MaintainX.

Initial 6000 Hours Cooling Oil Change

Machine utilization and ambient conditions are important criteria for the number and length of the change intervals.

Authorized KAESER Service representative will support you in determining appropriate intervals and provide information on the possibilities of oil analysis.

Please observe national regulations regarding the use of cooling oil in oil-injected screw compressors

Check operating conditions and adjust intervals as necessary.

Change S-460 ISO 46 Synthetic Lubricant

Change S-680 ISO 68 Synthetic Lubricant

Sign off on the oil change

Run this procedure

Initial 2000 Hours Cooling Oil Change

Warning: This procedure requires trained personnel with PPE!

Machine utilization and ambient conditions are important criteria for the number and length of the change intervals.

Authorized KAESER Service representative will support you in determining appropriate intervals and provide information on the possibilities of oil analysis.

Please observe national regulations regarding the use of cooling oil in oil-injected screw compressors.

Check operating conditions and adjust intervals as necessary.

Change M-460 ISO 46 Semi-Synthetic Lubricant.

Change FG-460 ISO 46 Food Grade Synthetic Fluid.

Sign off on the cooling oil change

Run this procedure

36000 Hourly / 6 Yearly Hose Lines Replacement

Warning: Only an authorized KAESER Service Technician should carry out service work.

Have service tasks carried out punctually taking ambient and operating conditions into account.

Hose lines replaced

Service Technician's Signature

Run this procedure

1 Yearly Screw Compressor Maintenance

Safety Warning: The machine must be isolated from the compressed air system and completely vented before undertaking any work on the pressure system.

Material: Replacement part, Cooling oil container

Precondition: The power supply disconnecting device is switched off, The disconnecting device is locked in the off position, A check has been made no voltage is present, The machine is fully vented, the pressure gauge reads 0 psig.

WARNING: There is risk of burns from hot components and oil. Wear long-sleeved clothing and gloves.

Change the oil filter

Start the machine and carry out a test run

Check the safety relief valve

Check the overheating safety shutdown function

Check the cooler for leaks

Run this procedure

36000 Hourly / 8 Yearly Drive Motor Bearings Check

Warning: Only an authorized KAESER Service Technician should carry out service work.

Service tasks should be carried out punctually taking ambient and operating conditions into account.

Drive motor bearings check

Service Technician Signature