Kaeser Screw Compressor BSD60

Warning: This procedure requires trained personnel with PPE!

Machine utilization and ambient conditions are important criteria for the number and length of the change intervals.

Authorized KAESER Service representative will support you in determining appropriate intervals and provide information on the possibilities of oil analysis.

Please observe national regulations regarding the use of cooling oil in oil-injected screw compressors.

Check operating conditions and adjust intervals as necessary.

Change M-460 ISO 46 Semi-Synthetic Lubricant.

Change FG-460 ISO 46 Food Grade Synthetic Fluid.

Sign off on the cooling oil change

Warning: Machine utilization and ambient conditions are important criteria for the number and length of the change intervals.

Authorized KAESER Service representative will support you in determining appropriate intervals and provide information on the possibilities of oil analysis.

Please observe national regulations regarding the use of cooling oil in oil-injected screw compressors.

Check operating conditions and adjust intervals as necessary.

Change S-460 ISO 46 Synthetic Lubricant

Change S-680 ISO 68 Synthetic Lubricant

Sign off on the cooling oil change

Change the oil separator cartridge

The machine must be isolated from the compressed air system and completely vented before undertaking any work on the pressure system.

The oil separator cartridge cannot be cleaned.

The life of the oil separator cartridge is influenced by:

contamination in the air drawn into the compressor,

adherence to the changing intervals for:

Change the cooling air filter mat

1. Open the fixing 3 by turning 90° counter clockwise with a screwdriver.

> Renew the mat if cleaning is not possible or has already been carried out 5 times.

> Beat the mat 1 or use a vacuum cleaner to remove loose dirt.

If necessary, wash the mat in lukewarm water (about 100 °F) and household detergent then rinse thoroughly.

Warning: Only an authorized KAESER Service Technician should carry out service work.

Have service tasks carried out punctually taking ambient and operating conditions into account.

Enter the current operating hours of the machine

Valves check completed successfully