Genie Personnel Lift CWP-12S AC

Inspect the Operator's and Responsibility Manuals

Inspect the Decals and Placards

Inspect for Damage and Loose or Missing Parts

Check the Auxiliary Platform Lowering Operation

Check the Manual Platform Lowering Operation

Inspect the Battery and Battery Charger - DC Models

- Inspect the Electrical Wiring

Maintaining electrical wiring in good condition is essential to safe operation and good machine performance.; Failure to find and replace burnt, chafed, corroded or pinched wires could result in unsafe operating conditions and may cause component damage.

WARNING; Electrocution hazard. Contact with hot or live circuits may cause death or serious injury. Remove all rings, watches and other jewelry.

1 Inspect the following areas for burnt, chafed, corroded and loose wires:

• inside of the ground control box

• inside of the base junction box

• all external machine electrical cables

Extremely dirty conditions may require that the casters and wheels be inspected more often.

1 Visually inspect each wheel for cuts, cracks or unusual wear.

2 Move the machine on a flat smooth surface and check that the wheels roll smoothly.

- Inspect the Mast Assembly for Wear

Detection of excessive or unusual wear in the mast assembly is essential for safe machine operation.

An unsafe working condition exists if the mast assembly has excessive wear and/or does not operate smoothly, free of hesitation and binding.

2 Raise the platform until 3 to 5 inches (7.6 to 12.7 cm) of each column is visible.