JUNGHEINRICH Industrial Truck EFG 435

Correct the brake fluid level via the check hole in the brake housing.

Correct the transmission oil level or grease filling of the transmission.

Lubricate the contact surfaces of the mast.

WARNING! A faulty attachment can be hazardous

Check the attachment daily for external signs of damage or defects. Faulty attachments can cause the load to fall.

Check for any external signs of damage or defects

Report any defects immediately to your supervisor.

Tag out and decommission a faulty lift truck.

Has the faulty lift truck been tagged out and decommissioned?

Only return the truck to service when you have identified and rectified the fault.

Has the fault been identified and rectified?

Hydraulic system breather filter replaced?

Sign off on the maintenance completion

Lubricate the contact surfaces of the mast.

Correct the hydraulic-oil level.

Correct the fill level of the windscreen washer reservoir.

Using different tyres can cause accidents

The quality of the tyres affects the operational stability and performance of the truck.

The diameter of the wheels must differ by no more than 15 mm.

Always replace tyres in pairs, i.e. left and right at the same time. After replacing the tyres, check that the wheel bolts/nuts are secure after 10 operating hours.

Always use tyres of the same make, model and profile.

Checking the mounting of wheels

– Truck prepared for maintenance and repair work (see page 314).