JUNGHEINRICH Industrial Truck EFG 425k

Correct the brake fluid level via the check hole in the brake housing.

Correct the transmission oil level or grease filling of the transmission.

WARNING! A faulty attachment can be hazardous. Check the attachment daily for external signs of damage or defects. Faulty attachments can cause the load to fall.

Check for any external signs of damage or defects

Reported defects to supervisor?

Decommissioned faulty lift truck?

Identified and rectified the fault before returning the truck to service?

No welding work carried out without a permit from the manufacturer?

Sign off on the daily attachment inspection

Hydraulic system breather filter replaced?

Sign off on the maintenance completion

Lubricate the contact surfaces of the mast

Correct the hydraulic-oil level

Correct the fill level of the windscreen washer reservoir

Correct the battery-acid level using demineralised water

Test emergency disconnect switch and check for damage

Using different tyres can cause accidents

The quality of the tyres affects the operational stability and performance of the truck.

The diameter of the wheels must differ by no more than 15 mm.

Always replace tyres in pairs, i.e. left and right at the same time. After replacing the tyres, check that the wheel bolts/nuts are secure after 10 operating hours.

Always use tyres of the same make, model and profile.

Checking the mounting of wheels

– Truck prepared for maintenance and repair work (see page 314).