Intelligent Actuator Tabletop Robot TTA-C3

Clean exterior surfaces as necessary

Wipe off water and chemical on the surface of the main unit

Use a soft cloth to wipe away dirt and buildup

Remove severe buildup with a soft cloth soaked in a neutral detergent or alcohol

8.1 Inspection Items and Schedule

Adjust inspection intervals based on actuator utilization

8.1 Inspection Items and Schedule

Perform internal inspection every 6 months

8.5.2 Period of Time to Supply Grease

Reference period of time to supply grease based on speed

Is the grease supply period determined by the operation distance or number of months reached earlier?

Use Idemitsu Kosan Daphne Grease MP No.2 or equivalent

Examples of equivalent grease products

Ensure no fluorine-based grease is used

Move the slider until the grease nipple is visible

Period of Time to Supply Grease

Supply grease once in 3 months after the start of first operation after delivery.

How to Supply the Grease on X, Y, and Z Axes

Ensure no fluorine-based grease is used

General Grease Supply Procedure

Move the slider until the grease nipple on the slider can be seen in the supply inlet

Put the grease gun into the grease supply inlet and supply grease on the grease nipple

8.5.2 Period of Time to Supply Grease

Has the equipment been stored for 6 months or more?

Check if the existing grease is degraded.

Supply grease before use if stored for 6 months or more.

Refer to Procedures to Supply Grease on Axes