Hexagon Manufacturing Intelligence Coordinate Measuring Machine GLOBAL S CHROME 09.15.08

Emergency Button Functionality Check

Verify the functionality of emergency buttons

Are all emergency buttons functioning properly?

Peripheral Protective Devices Check

Check the functionality of peripheral protective devices

Are all peripheral protective devices functioning properly?

Is the laser scanner working as per the user instruction manual?

Is the extension of the protected areas correct?

Check that all emergency stop buttons are working correctly

Inspect buttons and switches for damage and functionality

Check the condition of the air hoses for air leaks

Inspect cables for signs of abrasion or wear

Pneumatic Control Unit Maintenance

Replace the primary filter if necessary

Check the state of the secondary filter

Replace the secondary filter if necessary

Check presence of anti-tilt feet

Measure distance from top ends of anti-tilt feet to bottom surface of granite

Anti-Vibration Support Inspection

Verify position of anti-vibration supports

Were any faults found in the anti-tilt feet or anti-vibration supports?

Stop the measuring system if faults are found

Safety and Emergency Systems Check

Verify functionality of safety systems

Visual Inspection and Hardware Check

Perform visual inspection for missing or damaged parts

Tighten any loose screws and nuts

Replace any missing screws or nuts

Inspect Jogbox cable for damage

Remove the transparent polycarbonate cup

Use a compressed air jet to remove solid residue from the filter

Was the air jet sufficient to clean the filter completely?

If necessary, wash the filter with neutral detergent and use the air jet again