Domino Thermal Transfer Overprinter V120i

Power off the printer and allow the print head to cool before cleaning.

Ensure the following cleaning materials are available

Clean a new print head before use.

Clean the print head only after it is installed in the printer and just before use.

Clean the print head after replacing the ribbon.

Move the cleaning pen from side to side over the print head to clean it.

Verify that the 'Contrast' setting is at its original value.

Verify that the 'Print Head Pressure' setting is at its original value.

Has the print quality deteriorated?

Clean the print head if necessary.

Were any settings adjusted to compensate for print quality issues?

Describe any changes made to settings and the reasons for them.

Replace ribbons with care to avoid cutting hands or fingers

Clean the print head and capstan before fitting a new ribbon

Ensure loose ribbon is wound up on the rewind spindle to create tension

Select Printer Status > Ribbon > Ribbon Type

Choose the correct ribbon type from the list