WEG Electric Motor CT002502NPW01

Ensure free airflow around the motor

Is the motor operating within normal parameters?

Describe any issues found during inspection

Transport, Storage, and Handling

Ensure the motor is stored in a clean, dry, dust-free location

Check for absence of vibrations, gases, and corrosive agents in the storage area

Verify that the relative humidity does not exceed 60%

Keep the heating resistor on to avoid water condensation inside the motor (if available)

Manually rotate the motor shaft at least once a month, making at least 5 turns

Ensure the motor shaft is left in a different position after rotation

Shaft Grounding Brush Inspection

Check the condition of the shaft grounding brush

Is the brush at the end of its useful life?

Replace the brush with another of the same specification if necessary

Verify if the motor has an internal grounding brush (check for label on the product)

Perform grounding brush check during bearing or internal motor part maintenance

Transport, Storage, and Handling

Measure the motor's insulation resistance periodically

Measure the motor's insulation resistance before energizing it for the first time

Check the recommended values and measurement procedures on the website

Transport, Storage, and Handling