WEG Electric Motor CT001504NPW01

Ensure motors are protected from accidental starts

Run the motor unloaded to check rotation direction

Ensure the rotor is locked before performing operations on the terminals

Check the proper functioning of accessories installed on the motor

Shaft Grounding Brush Inspection

Check the condition of the shaft grounding brush

Is the brush at the end of its useful life?

Replace the brush with another of the same specification if necessary

Verify if the motor has an internal grounding brush (check for label on the product)

Perform grounding brush check during bearing or internal motor part maintenance

Transport, Storage, and Handling

Ensure proper storage conditions for bearings with oil mist lubrication systems

Manually rotate the shaft once a week

Have the motors with open bearings been stored for more than six months?

Relubricate bearings with the grease amount indicated on the nameplate before operation

Transport, Storage, and Handling

Measure the motor's insulation resistance periodically

Measure the motor's insulation resistance before energizing it for the first time

Check the recommended values and measurement procedures on the website

Ensure free airflow around the motor

Inspect the following components

Is the motor operating within normal parameters?

Describe any issues found during inspection