WEG Electric Motor CT007502NPW01

Is the airflow free and unobstructed?

Check for unusual vibration or noise

Inspect seals for wear or damage

Ensure fastening bolts are secure

Check bearings for proper lubrication

Inspect motor drainage for blockages

Check automatic drain for obstructions

Shaft Grounding Brush Inspection

Verify the presence of a shaft grounding system

Inspect the condition of the grounding brush

Is the grounding brush at the end of its useful life?

Shaft Grounding Brush Replacement

Replace the grounding brush with one of the same specification

Check for internal grounding brush label

Was the internal grounding brush checked during bearing or internal motor part maintenance?

Transport, Storage, and Handling

Ensure the motor is stored in a clean, dry, dust-free location

Verify the storage area is free of vibrations, gases, and corrosive agents

Check that the relative humidity does not exceed 60%

Keep the heating resistor on to avoid water condensation inside the motor (if available)

Manually rotate the motor shaft at least once a month, making at least 5 turns

Ensure the motor shaft is left in a different position after rotation

Ensure motors are protected from accidental starts

Check the motor's rotation direction by running it unloaded before coupling it to the load

Ensure the rotor is locked before performing operations on the terminals

Check the proper functioning of accessories installed on the motor

Transport, Storage, and Handling

Measure the motor's insulation resistance

Check the recommended values and measurement procedures on the website