Leybold Vacuum Pump TURBOVAC T350iX DN100ISO-K

4.1 Media compatibility / purge gas

4.7 Removing the pump from the system

Shut down the pump and vent as described in Sections 4.4 and 4.5.

Has the pump previously handled hazardous gases?

Implement proper precautionary measures before opening the intake or exhaust connection if hazardous gases were handled.

Observe Safety Information 0.4.6.

Ensure the pump has come to a full stop before disconnecting.

Switch the mains power off and wait until the yellow power LED is off.

Disconnect any cable connections.

Measure suspended matter concentration

Measure electrical conductivity

Check for aggressive carbon dioxide presence

Determine if bearing replacement is required

Contact after sales service for on-site bearing replacement

Request a quotation for bearing replacement at Leybold Service Center

0.4 Hazards caused by materials and substances

Ensure the forevacuum line is tight

Check for potential leaks where hazardous gases can escape

Verify the pump's integral leak rate is < 1·10-8 mbar·l/s upon delivery

Conduct a leak search after installing the pump or performing service work

Perform regular leak searches when pumping toxic gases