

Turn manuals into instant answers
with your AI-powered assistantTurn manuals into instant answers
with your AI-powered assistant
Get instant access to all the maintenance information you need. Empower technicians to perform preventive maintenance with asset packages, ready to use right out of the box.
Find all the essential guides in one place.
Tensioning Guide
Belt-diagram
C-120 pulleys
+ 13 more
Pre-built workflows to keep your asset running smoothly.
Daily Electrical System Inspection
Replace Roller and Pulley
Install Engine B-120
+ 29 more
Integrate maintenance plans directly into your work orders.
Motion Industries
Applied Industrial Technologies
Electrical Brothers
+ 5 more
Access the parts list for your equipment in MaintainX.
Drive Motor
B2 Rollers
Tensioning System
+ 40 more

Kubota Diesel Engine OC95
Create an account to install this asset package.
Integrate maintenance plans directly into your work orders in MaintainX.
100 Hourly Fuel Filter Maintenance
Warning: Handle the fuel filter with care to avoid damage.
Enter the machine's hour meter reading
Fuel filter removed after 100 hours of operation?
Fuel tank emptied before removing the fuel filter?
Fuel filter cleaned in fresh fuel?
Fuel filter damaged?
If the fuel filter is damaged, replace it.
Sign off on the fuel filter maintenance
1 Daily Diesel Engine Maintenance
Crankcase oil checked and replenished?
Air cleaner (paper element type) replenished?
Fuel tank checked and replenished?
Rubber hoses and Clamp bands checked?
Sign off on the daily diesel engine maintenance
100 Hourly Diesel Engine Maintenance
- Crankcase oil: Change the crank case oil 25 hours after initial operation and every 100 hours thereafter, using the following procedure:
(1) While the engine is still warm, empty the crankcase by removing the drain plug.
(2) Fill the crankcase up to the specified level with fresh oil.
- Battery: Check;
100 Hourly Air Cleaner Maintenance
Warning: Always ensure the machine is turned off and cooled down before performing any maintenance tasks.
Is the work site especially dusty?
If the work site is especially dusty, check and clean the air cleaner every day.
Remove any dust from the air cleaner and wipe the inner surfaces.
Remove dust from the air cleaner element by tapping it gently or by applying compressed air from the inside while rotating the element.
If the element is oily or coated with carbon dust, soak it in a neutral detergent solution for 15 minutes, wash it several times, rinse with fresh water, then allow it to dry.
NOTE:
Replace the element every year or after every sixth cleaning, whichever comes first.
If the element breaks, replace it. Otherwise, the service life of the engine will be shortened.
Initial 25 Hours Diesel Engine Maintenance
Crankcase oil: Change
Change the crank case oil 25 hours after initial operation and every 100 hours thereafter, using the following procedure:
Is the engine still warm?
If not, run the engine until it is warm.
Empty the crankcase by removing the drain plug.
Fill the crankcase up to the specified level with fresh oil.
Tail pipe of muffler: Cleaning
Clean the tail pipe of the muffler.
Sign off on the initial 25 hours diesel engine maintenance
MaintainX CoPilot is your expert colleague, on call 24/7, helping your team find the answers they need to keep equipment running.
Reduce Unplanned Downtime
Ensure your team follows consistent procedures to minimize equipment failures and costly delays.
Maximize Asset Availability
Keep your assets running longer and more reliably, with standardized maintenance workflows from OEM manuals.
Lower Maintenance Costs
Turn any technician into an expert to streamline operations, maintain more assets, and reduce overall costs.
Thousands of companies manage their assets with MaintainX













