Kubota Rotary Tiller K-420

Daily or after every ten hours of operation, perform the following steps:

Lubricate the tiller using No. 2 multi-purpose lithium grease

Use pressure lubricator and apply sufficient grease to flush out all of the old grease and dirt

When working in extremely dusty conditions, lubricate after every five hours of operation

Ensure all lubrication fittings are free of paint and dirt so that the lubricant gets to the bearings

Force the lubricant through the full length of each bearing until it emerges at the end, carrying with it the old lubricant and any dirt that may have entered the bearings

Check the oil level of the gear box

If lubricant is required fill to lower level plug opening with SAE-80 oil

Sign off on the maintenance procedure