MaintainX Logo
EnterprisePricing
JCB

JCB Rough Terrain Forklift 926

Need answers fast?
Explore the manual using AI.

JCB Rough Terrain Forklift 926
JCB Rough Terrain Forklift 926

The JCB Rough Terrain Forklift 926 is a robust and versatile material handling solution designed for challenging environments. With its powerful engine and advanced hydraulic system, this forklift excels in lifting and transporting heavy loads across rough terrains, making it an essential asset for construction and industrial applications.

Turn manuals into instant answers
with your AI-powered assistant
Turn manuals into instant answers
with your AI-powered assistant

PDF MANUAL

Manual for JCB Rough Terrain Forklift 926

MAINTENANCE RESOURCES

Complete asset maintenance, one click away

Get instant access to all the maintenance information you need. Empower technicians to perform preventive maintenance with asset packages, ready to use right out of the box.

Documents

Documents & Manuals

Find all the essential guides in one place.

  • CheckTensioning Guide

  • CheckBelt-diagram

  • CheckC-120 pulleys

  • + 13 more

Work Orders

Work Order Templates

Pre-built workflows to keep your asset running smoothly.

  • CheckDaily Electrical System Inspection

  • CheckReplace Roller and Pulley

  • CheckInstall Engine B-120

  • + 29 more

Procedures

Procedures

Integrate maintenance plans directly into your work orders.

  • CheckMotion Industries

  • CheckApplied Industrial Technologies

  • CheckElectrical Brothers

  • + 5 more

Parts

Parts

Access the parts list for your equipment in MaintainX.

  • CheckDrive Motor

  • CheckB2 Rollers

  • CheckTensioning System

  • + 40 more

JCB Rough Terrain Forklift 926

JCB Rough Terrain Forklift 926

Create an account to install this asset package.

Maintenance Plans for JCB Rough Terrain Forklift Model 926

Integrate maintenance plans directly into your work orders in MaintainX.

50 Hourly or 1 Weekly Rough Terrain Forklift Maintenance

Check mark

Coolant Quality and Level Check

Check mark

Engine Oil level Check

Check mark

Water Separator and Engine Fuel Filter Check

Check mark

Transmission Oil Level Check

Check mark

Tyre Pressures/Condition Check

Check mark

Tightness of Wheel Nuts(8) Check

Check mark

Rear Hub Bearings (2WD) Grease

Check mark

Steer Axle Pivots and Linkages Grease

Check mark

Track Rod Ends Grease

Run this procedureArrow right

500 Hourly or 6 Monthly Rough Terrain Forklift Maintenance

Check mark

Coolant Quality and Level Check

Check mark

Oil and Filter(2)(3) Change

Check mark

Air Cleaner Dust Valve(4) Change

Check mark

Air Cleaner Outer Element(4) Change

Check mark

Water Separator and Engine Fuel Filter Drain

Check mark

Water Separator Fuel Filter(5) Change

Check mark

Front End Accessory Drive (FEAD) Belt Condition Check

Check mark

Engine Mounting Bolts for Tightness Check

Check mark

All Hoses - Condition Check

Run this procedureArrow right

Cleaning the Machine

Check mark

WARNING: To avoid burning wear personal protective equipment (PPE) when handling hot components. To protect your eyes, wear personal protective equipment (PPE) when using a brush to clean components.

Check mark

WARNING: Airborne particles of light combustible material such as straw, grass, wood shavings, etc. must not be allowed to accumulate within the engine compartment or in the propshaft guards (when fitted). Inspect these areas frequently and clean at the beginning of each work shift or more often if required. Before opening the engine cover, ensure that the top is clear of debris.

Check mark

CAUTION: Never use water or steam to clean inside the cab. The use of water or steam could damage the on-board computer and render the machine inoperable. Remove dirt using a brush or damp cloth.

Check mark

Pay particular attention to the following areas:

Check mark

1 Cleaning the Tubes/Fins

Check mark

If the radiator tubes/fins get clogged the radiator will be less efficient.

Check mark

a Remove the radiator grille.

Check mark

b Open the bonnet and clean the radiator. Brush off all debris from the cooler tubes and fins. Make sure the loosened material is brushed out of the cooler enclosure.

Check mark

c Close the bonnet and fit radiator grille.

Run this procedureArrow right

Testing the Park Brake

Check mark

WARNING: Before testing the park brake make sure the area around the machine is clear of people.

Check mark

Enter the machine. Fasten your seat belt (if fitted) and park the machine on a level dry surface.

Check mark

Fully apply park brake.

Check mark

Start the engine and raise the attachments to the appropriate travel position.

Check mark

Select fourth gear.

Check mark

Push down hard on foot brake pedal.

Check mark

Select forward drive. The park brake warning light must illuminate.

Check mark

WARNING: If the machine starts to move during the following test, immediately apply the foot brake and reduce the engine speed.

Check mark

Move the park brake lever fractionally forward until the park brake warning light is just extinguished.

Run this procedureArrow right

2000 Hourly or 2 Yearly Rough Terrain Forklift Maintenance

Check mark

Cooling System Drain and Refill

Check mark

Oil and Filter(2)(3) Change

Check mark

Air Cleaner Dust Valve(4) Change

Check mark

Air Cleaner Outer Element(4) Change

Check mark

Air Cleaner Inner Element(4) Change

Check mark

Water Separator and Engine Fuel Filter Drain

Check mark

Water Separator Fuel Filter(5) Change

Check mark

Engine Fuel Filter Change

Check mark

Front End Accessory Drive (FEAD) Belt Condition Check

Run this procedureArrow right

Parts for JCB Rough Terrain Forklift 926

Access the parts list for your equipment in MaintainX.

Part Name
Part Number

Engine (Coolant) JCB Antifreeze HP Coolant/Water

4006/1120

Engine (Oil) (2) JCB Engine Oil EP 15W40 -10°C to +50°C (14°F to 122°F)

4001/1805

Transmission JCB Extreme Performance EP 10W (3)

4000/2505

JCB Engine Oil HP 10W30 -20°C to 40°C (-4°F to 104°F)

4001/1700

Mast Chains JCB Chain Lubricant

4004/0237A

Engine (Coolant) JCB Antifreeze HP Coolant/Water

4006/1120

Engine (Oil) (2) JCB Engine Oil EP 15W40 -10°C to +50°C (14°F to 122°F)

4001/1805

Transmission JCB Extreme Performance EP 10W (3)

4000/2505

JCB Engine Oil HP 10W30 -20°C to 40°C (-4°F to 104°F)

4001/1700

Mast Chains JCB Chain Lubricant

4004/0237A

Engine (Coolant) JCB Antifreeze HP Coolant/Water

4006/1120

Engine (Oil) (2) JCB Engine Oil EP 15W40 -10°C to +50°C (14°F to 122°F)

4001/1805

Transmission JCB Extreme Performance EP 10W (3)

4000/2505

JCB Engine Oil HP 10W30 -20°C to 40°C (-4°F to 104°F)

4001/1700

Mast Chains JCB Chain Lubricant

4004/0237A

Unlock efficiency
with MaintainX CoPilot

MaintainX CoPilot is your expert colleague, on call 24/7, helping your team find the answers they need to keep equipment running.

Time Lapse Icon

Reduce Unplanned Downtime

Ensure your team follows consistent procedures to minimize equipment failures and costly delays.

Wrench Clock Icon

Maximize Asset Availability

Keep your assets running longer and more reliably, with standardized maintenance workflows from OEM manuals.

Dollar Coin Icon

Lower Maintenance Costs

Turn any technician into an expert to streamline operations, maintain more assets, and reduce overall costs.

Thousands of companies manage their assets with MaintainX

DuracellAB InBevErgonTitan AmericaMeritUnivar SolutionsRivianCadrexMagnaMaasPresriteSoutheast PowerInterrollDuracellAB InBevErgonTitan AmericaMeritUnivar SolutionsRivianCadrexMagnaMaasPresriteSoutheast PowerInterroll

More from JCB

Explore Other Assets