Turn manuals into instant answers
with your AI-powered assistantTurn manuals into instant answers
with your AI-powered assistant
Get instant access to all the maintenance information you need. Empower technicians to perform preventive maintenance with asset packages, ready to use right out of the box.
Find all the essential guides in one place.
Tensioning Guide
Belt-diagram
C-120 pulleys
+ 13 more
Pre-built workflows to keep your asset running smoothly.
Daily Electrical System Inspection
Replace Roller and Pulley
Install Engine B-120
+ 29 more
Integrate maintenance plans directly into your work orders.
Motion Industries
Applied Industrial Technologies
Electrical Brothers
+ 5 more
Access the parts list for your equipment in MaintainX.
Drive Motor
B2 Rollers
Tensioning System
+ 40 more
JCB Backhoe Loader 3CX 14M4CE
Create an account to install this asset package.
Integrate maintenance plans directly into your work orders in MaintainX.
2000 Hours / 2 Yeary Loader Hydraulics Maintenance
Sample/Change Hydraulic Oil
Change Oil Filter
Check Rams - Chrome Condition
Sign off on the loader hydraulics maintenance
1000 Hours / 1 Yeary Loader Transmission Maintenance
- Change Transmission Oil
- Change Transmission Filter
- Change Axle Oil (incl. Hubs when applicable)
- Change Axle Oil - Limited Slip Differential
- Check Tyre Pressures/Condition
- Check Front Hub Bearings
- Clean Transmission Strainer
- Security/Grease Drive Shafts
- Check Steer Axle Movement/Shimming
100 Hours Loader Transmission Maintenance
Check Transmission Oil Level
Change Transmission Filter
Check Axle Oil Level (incl. Hubs when applicable)
Check Tyre Pressures/Condition
Check Front Hub Bearings
Security/Grease Drive Shafts
Check Steer Axle Movement/Shimming
Grease Steer Axle Pivots and Linkages
Grease Front Axle Main Pivot
1 Yearly Fire Extinguisher Service
Check the fire extinguisher for damage, security and signs of leaking
Check that the gauge B indicates that the extinguisher is charged ie. the needle is in the GREEN segment
Note: If the needle is in or very near the RED segment at either end of the gauge, the extinguisher must be serviced or replaced
Make sure the safety pin is fitted and secure
The extinguisher should be serviced every 12 months by a suitably qualified person
Check the ROPS/FOPS Structure (p.49)
Sign off on the fire extinguisher service
2000 Hours / 2 Yeary Loader Transmission Maintenance
- Change Transmission Oil
- Change Transmission Filter
- Change Axle Oil (incl. Hubs when applicable)
- Change Axle Oil - Limited Slip Differential
- Check Tyre Pressures/Condition
- Check Front Hub Bearings
- Clean Transmission Strainer
- Security/Grease Drive Shafts
- Check Steer Axle Movement/Shimming
Access the parts list for your equipment in MaintainX.
Flow Test Adapter
460/15708
Banjo Bolt
460/15707
Bonded Washer, 1/4 in. BSP
1406/0011
Bonded Washer, 5/8 in. BSP
1406/0014
Bonded Washer, 1/2 in. BSP
1406/0018
Flow Test Adapter
460/15708
Banjo Bolt
460/15707
Bonded Washer, 1/4 in. BSP
1406/0011
Bonded Washer, 5/8 in. BSP
1406/0014
Bonded Washer, 1/2 in. BSP
1406/0018
Flow Test Adapter
460/15708
Banjo Bolt
460/15707
Bonded Washer, 1/4 in. BSP
1406/0011
Bonded Washer, 5/8 in. BSP
1406/0014
Bonded Washer, 1/2 in. BSP
1406/0018
MaintainX CoPilot is your expert colleague, on call 24/7, helping your team find the answers they need to keep equipment running.
Reduce Unplanned Downtime
Ensure your team follows consistent procedures to minimize equipment failures and costly delays.
Maximize Asset Availability
Keep your assets running longer and more reliably, with standardized maintenance workflows from OEM manuals.
Lower Maintenance Costs
Turn any technician into an expert to streamline operations, maintain more assets, and reduce overall costs.
Thousands of companies manage their assets with MaintainX