JCB Backhoe Loader 214 RT

- Check the Seat Belt Condition and Security

When a seat belt is fitted to your machine replace it with a new one if it is damaged, if the fabric is worn, or if the machine has been in an accident. Fit a new seat belt every three years

1. Inspect the seat belt for signs of fraying and stretching

2. Check that the stitching is not loose or damaged. Check that the buckle assembly is undamaged and works correctly

3. Check that the belt mounting bolts are undamaged, correctly fitted and tightened;

- Check Axle Oil Level (incl. Hubs when applicable)

- Check Tyre Pressures/Condition

- Check Steer Axle Movement/Shimming

- Grease Steer Axle Pivots and Linkages

- Grease Front Axle Main Pivot;

- Change Axle Oil (incl. Hubs when applicable)

- Change Axle Oil - Limited Slip Differential

- Check Tyre Pressures/Condition

- Check Steer Axle Movement/Shimming

Check the fire extinguisher for damage, security and signs of leaking

Check that the gauge B indicates that the extinguisher is charged ie. the needle is in the GREEN segment

Note: If the needle is in or very near the RED segment at either end of the gauge, the extinguisher must be serviced or replaced

Make sure the safety pin is fitted and secure

The extinguisher should be serviced every 12 months by a suitably qualified person

Check the ROPS/FOPS Structure (p.49)

Sign off on the fire extinguisher service

- Check Tyre Pressures/Condition