JCB Backhoe Loader 3CX 2

Note damaged paintwork for future repair

All pivot pins are correctly in place and secured by their locking devices

Steps and handrails are undamaged and secure

No broken or cracked window glass

Upload a photo of replaced items

All bucket teeth are undamaged and secure

Tyres are undamaged and free from penetration by sharp objects

- Change Engine Oil and Filter (AK and AR Build)

- Change Engine Oil and Filter (RE and RG Build)

- Change Engine Air Cleaner Outer Element

- Change Engine Fuel Filter (AK and AR Build)

- Change Engine Fuel Filter (RE and RG Build)

- Clean Lift Pump Strainer (AK and AR Build Only)

- Drain and Clean Engine Fuel Sedimenter

- Check Fan Belt Tension/Condition

Warning: If a wheel stud is renewed, all the studs for that wheel must be changed as a set, since the remaining studs may have been damaged

On new machines, and whenever a wheel has been removed, check the wheel nut torques every two hours until they stay correct

Every day, before starting work, check that the wheel nuts are tight

The correct torques are shown in the table below: Front - Nm 680 / Ibf ft 500, Rear - Nm 680 / Ibf ft 500

Sign off on the wheel nut check

Change Engine Oil and Filter (AK and AR Build)

Change Engine Fuel Filter (AK and AR Build)

Clean Lift Pump Strainer (AK and AR Build Only)

Drain and Clean Engine Fuel Sedimenter

Check Fan Belt Tension/Condition

Check Engine Mounting Bolts for Tightness

Sign off on the 100 Hours Loader Engine Maintenance

Drain and Clean Engine Fuel Sedimenter

Sign off on the engine maintenance