JCB Backhoe Loader 3CXR14L4CE

Check Axle Oil Level (incl. Hubs when applicable)

Change Axle Oil - Limited Slip Differential

Check Steer Axle Movement/Shimming

Grease Steer Axle Pivots and Linkages

Warning: If, for whatever reason, a wheel stud is renewed, all the studs for that wheel must be changed as a set, since the remaining studs may have been damaged

On new machines, and whenever a wheel has been removed, check the wheel nut torques every two hours until they stay correct

Every day, before starting work, check that the wheel nuts are tight

The correct torques are shown in the table below: Front - Nm 680 / Ibf ft 500, Rear - Nm 680 / Ibf ft 500

Sign off on the daily wheel nut check

- Change Engine Oil and Filter (AK and AR Build)

- Change Engine Oil and Filter (RE and RG Build)

- Change Engine Air Cleaner Outer Element

- Change Air Cleaner Inner Element

- Change Engine Fuel Filter (AK and AR Build)

- Change Engine Fuel Filter (RE and RG Build)

- Clean Lift Pump Strainer (AK and AR Build Only)

- Drain and Clean Engine Fuel Sedimenter

Sign off on the loader hydraulics maintenance

Check Axle Oil Level (incl. Hubs when applicable)

Check Steer Axle Movement/Shimming

Grease Steer Axle Pivots and Linkages