JCB Backhoe Loader 3CX 4

- Change Engine Oil and Filter (AK and AR Build)

- Change Engine Oil and Filter (RE and RG Build)

- Change Engine Air Cleaner Outer Element

- Change Engine Fuel Filter (AK and AR Build)

- Change Engine Fuel Filter (RE and RG Build)

- Clean Lift Pump Strainer (AK and AR Build Only)

- Drain and Clean Engine Fuel Sedimenter

- Check Fan Belt Tension/Condition

Sign off on the loader hydraulics maintenance

Note damaged paintwork for future repair

All pivot pins are correctly in place and secured by their locking devices

Steps and handrails are undamaged and secure

No broken or cracked window glass

All bucket teeth are undamaged and secure

Tyres are undamaged and free from penetration by sharp objects

Check the fire extinguisher for damage, security and signs of leaking

Check that the gauge B indicates that the extinguisher is charged

Note: If the needle is in or very near the RED segment at either end of the gauge, the extinguisher must be serviced or replaced

Make sure the safety pin is fitted and secure

The extinguisher should be serviced every 12 months by a suitably qualified person

Sign off on the fire extinguisher service