Hyundai Car Venue

Ensure the wheel has cooled before cleaning

Avoid abrasive cleaners, polishing compounds, solvents, or wire brushes

Avoid high-speed car wash brushes

Avoid alkaline or acid detergents

Clean wheels after driving on salted roads to prevent corrosion

Is the engine turned off and cooled down?

Wrap a thick towel around the radiator cap before removal.

Ensure the cooling fan is not operating.

Check the coolant level in the reservoir (between F and L).

Is the coolant level between F (Full) and L (Low)?

Is the coolant level below L (Low)?

Ensure no sparks or flames are near the washer fluid reservoir

Avoid contact with washer fluid to prevent poisoning

Check the fluid level in the washer fluid reservoir

Select the type of fluid to add

Add the selected fluid to the reservoir if necessary

Follow all of the oil manufacturer’s precautions.

Ensure the vehicle is on level ground in P (Park) with the parking brake set and the wheels blocked.

Turn the engine on and allow it to reach normal operating temperature.

Turn the engine off, remove the oil filler cap and pull the dipstick out.

Wait for 15 minutes for the oil to return to the oil pan.

Wipe the dipstick clean and reinsert it fully.

Wash the vehicle thoroughly with lukewarm or cold water at least once a month.

Wash the vehicle after each off-road trip.

Remove accumulation of foreign materials

Ensure drain holes in the lower edges of the doors and rocker panels are clear and clean.

Rinse the vehicle thoroughly with lukewarm or cold water after washing.

Avoid washing the vehicle in direct sunlight or when the body is warm.

Avoid using strong soap, chemical detergents, or hot water.

Avoid high-pressure water on side windows to prevent interior wetting.