Genie Articulated Boom Lift SX-135 XC

Inspect for leaks in oil, fuel, and coolant systems

Air cleaner element maintenance

Test the Fuel Select Operation - Gasoline/LPG Models

Ensure the following conditions are met before starting the test

Move the fuel select switch to gasoline and set engine idle control to foot switch activated high idle

Start the engine from the platform controls and allow it to run at low idle

Press down the foot switch to allow the engine to run at high idle

Check if the engine starts promptly and operates smoothly in low and high idle

Check radiator hoses and clamps

Push in the platform red Emergency Stop button to the off position

Turn the key switch to ground controls

Pull out the red Emergency Stop button to the on position at the ground controls

Operate each boom function through a partial cycle from the ground controls

Activate the foot switch and operate each boom function from the platform

Pull out the red Emergency stop button to the on position at the platform controls

Activate the foot switch and operate each boom function

Clean Air filter discharge valve

Check/Drain Engine air precleaner

Clean/Replace Air cleaner element

Drain Fuel system filter/water separator