ELEPHANT CHAIN BLOCK Chain Hoist FB-3

Turn off the power source of the electric chain hoist

Ensure the electric chain hoist is unloaded

Set up a warning plate indicating 'Under Inspection'

Reconfirm the safety of the surrounding area

Verify no modifications have been made to the following

Ensure only genuine parts are used for

Check that the load chain has not been shortened or lengthened

Switch OFF the power source before starting maintenance.

Ensure maintenance is performed by qualified personnel or a certified dealer.

Perform maintenance in a non-loading condition.

Do not use the hoist if any abnormality is found during inspection.

Follow the proper inspection method for safe operation.

Ensure the power source is completely switched OFF.

Confirm the safety of the surrounding area.

Ensure maintenance is performed by qualified personnel or a dealer

Confirm non-loading condition (hoisting no load)

Verify safety of the surrounding area

Inspection of Push-Button Switch

Check for cracks or fractures in the switch casing

Verify smooth movement of push buttons

Inspect for looseness of screws or abnormalities in the lead wire after removing the cover

Switch OFF the power source before starting maintenance.

Ensure maintenance is performed by qualified personnel.

Confirm non-loading condition for maintenance.

Do not use the hoist if any abnormality is found.

Follow proper inspection methods for safe operation.

Ensure power source is OFF and surrounding area is safe.

Place the electric chain hoist on the ground for overhaul.

Check for abnormal pitch elongation

Inspect for excessive wear on wire diameter

Ensure chain is free from deformation

Check for cracks or other harmful defects

Inspect for remarkable rust or corrosion

Check for remarkable deformation in hook opening

Ensure hook is free from bends and twists