ELEPHANT CHAIN BLOCK Chain Hoist FA-3

Switch OFF the power source before maintenance, inspection, and repair work.

Ensure maintenance, inspection, and repair work is done by persons with specialized knowledge or a dealer of the products.

Ensure maintenance, inspection, and repair is carried out in non-loading condition.

Do not use the hoist if any abnormality is found during maintenance and inspection.

Follow the proper inspection method to ensure safe and full-functioned operation of the electric chain hoist.

Switch OFF the power source of the electric chain hoist and reconfirm the safety of the surrounding area.

Ensure the electric chain hoist is on the ground if making an overhaul.

Pre-Operation Warnings and Notices

Ensure no modifications are made to the electric chain hoist and its accessories.

Verify only genuine parts are used.

Confirm no shortening or lengthening of the load chain has been done.

Ensure power source is turned off before maintenance, inspection, or repair.

Verify only authorized specialists perform maintenance, inspection, or repair.

Ensure maintenance, inspection, or repair is carried out with the hoist unloaded.

If any disorder is found, ensure repair is made before re-operating the hoist.

Set up a warning plate indicating 'Under working' or similar during maintenance.

Ensure the following precautions are taken before maintenance

Set up a warning plate indicating 'Under working' or 'Under Inspection'

Ensure inspections requiring dismantling and assembling are carried out by authorized dealers

Is there any abnormal condition in the capsized bottom hook block?

Is there a twist in the load chain?

Ensure no modifications are made to the electric chain hoist and its accessories.

Use only genuine parts made by the manufacturer.

Avoid shortening or lengthening the load chain.

Turn off the power source before maintenance, inspection, or repair.

Ensure only authorized specialists perform maintenance, inspection, or repair.

Perform maintenance, inspection, or repair with the hoist unloaded.

Set up a warning plate indicating 'Under Inspection' before starting.

Check the chain for the following issues

Check the hook for the following issues

Check the body for the following issues

Check the trolley for the following issues

Push-button Switch and Cord Inspection