ELEPHANT CHAIN BLOCK Chain Hoist FB-0.49

Ensure the following warnings are adhered to

Set up a warning plate indicating 'Under working', 'Under Inspection', or 'Passing the current prohibited' before maintenance

Ensure inspections requiring dismantling and assembling are carried out by authorized dealers

Is the electric chain hoist model with multiple load chains (FA and FB types with 2-ton and 3-ton capacity, or SA with 1-ton capacity)?

Check for any abnormal condition called capsized bottom hook block where the bottom hook goes through in-between load chains

Ensure the power source is turned off before maintenance.

Confirm the electric chain hoist is unloaded.

Set up a warning plate indicating 'Under Inspection'.

Ensure only authorized specialists perform the inspection.

Inspection of Electric Chain Hoist Functions

Do all the important functions of the electric chain hoist operate normally?

Is there degradation in any of the essential parts beyond the acceptable limit?

Power Supply and Support Structure Check

Ensure compliance with the following warnings

Set up a warning plate indicating 'Under working', 'Under Inspection', or 'Passing the current prohibited' before maintenance

Ensure inspections requiring dismantling and assembling are carried out by authorized dealers

Is there any abnormal condition called capsized bottom hook block?

Is there a twist in the load chain?

Switch OFF the power source before maintenance, inspection, and repair work.

Ensure maintenance, inspection, and repair work is done by persons with specialized knowledge or a dealer of the products.

Ensure maintenance, inspection, and repair is carried out in non-loading condition.

Is there any abnormality found during maintenance and inspection?

Do not use the hoist if any abnormality is found.

Follow the proper inspection method for safe operation of the electric chain hoist.

Switch OFF the power source of the electric chain hoist and reconfirm the safety of the surrounding area.

Switch OFF the power source before maintenance

Ensure maintenance is performed by qualified personnel

Confirm non-loading condition before maintenance

Do not use the hoist if any abnormality is found

Follow proper inspection method

Switch OFF the power source and confirm surrounding safety

Ensure the hoist is on the ground for overhaul