

Turn manuals into instant answers
with your AI-powered assistantTurn manuals into instant answers
with your AI-powered assistant
Get instant access to all the maintenance information you need. Empower technicians to perform preventive maintenance with asset packages, ready to use right out of the box.
Find all the essential guides in one place.
Tensioning Guide
Belt-diagram
C-120 pulleys
+ 13 more
Pre-built workflows to keep your asset running smoothly.
Daily Electrical System Inspection
Replace Roller and Pulley
Install Engine B-120
+ 29 more
Integrate maintenance plans directly into your work orders.
Motion Industries
Applied Industrial Technologies
Electrical Brothers
+ 5 more
Access the parts list for your equipment in MaintainX.
Drive Motor
B2 Rollers
Tensioning System
+ 40 more

ELEPHANT CHAIN BLOCK Chain Hoist FB-2
Create an account to install this asset package.
Integrate maintenance plans directly into your work orders in MaintainX.
1 Daily Chain Hoist Idle Operation Check
Pre-Inspection Warnings and Notices
Ensure no modifications are made to the electric chain hoist and its accessories.
Verify only genuine parts are used.
Confirm no shortening or lengthening of the load chain has been done.
Ensure power source is turned off before maintenance.
Verify only authorized specialists perform maintenance.
Ensure maintenance is carried out with the hoist unloaded.
Check for any disorders and ensure repairs are made before re-operation.
Set up a warning plate indicating 'Under working' or similar during maintenance.
Chain Hoist Trolley Check
Pre-Inspection Safety Measures
Switch OFF the power source before maintenance, inspection, and repair work.
Ensure maintenance, inspection, and repair work is done by persons with specialized knowledge or a dealer of the products.
Ensure non-loading (hoisting no load) condition during maintenance, inspection, and repair.
Do not use the hoist if any abnormality is found during maintenance and inspection.
Inspection Preparation
Follow the proper inspection method to ensure safe and full-functioned operation of the electric chain hoist.
Switch OFF the power source of the electric chain hoist and reconfirm the safety of the surrounding area.
Put the electric chain hoist down on the ground for overhaul.
Chain Hoist Motor Brake Check
Pre-Inspection Safety Measures
Switch OFF the power source before starting maintenance.
Ensure maintenance is performed by qualified personnel or contact a dealer.
Perform maintenance in a non-loading condition (hoisting no load).
Is the hoist free from abnormalities?
Pre-Inspection Setup
Ensure the electric chain hoist is in a non-loading state.
Lower the hoist to about 10 cm before the safety actuation point.
Switch OFF the power source and confirm the safety of the surrounding area.
Chain Hosit Chain Check
Pre-Inspection Safety Measures
Switch OFF the power source before maintenance.
Ensure maintenance is performed by qualified personnel or contact a dealer.
Ensure hoist is in a non-loading condition.
Is the surrounding area safe and power source confirmed OFF?
Initial Chain Inspection
Is there sufficient oiling on the whole length of the chain?
Are there any remarkable flaws on the chain?
Is there any knot or twist in the chain?
Chain Hoist Nameplate Check
Safety Precautions
Switch OFF the power source before maintenance, inspection, and repair work.
Ensure maintenance, inspection, and repair work is done by persons with specialized knowledge or consult a dealer.
Carry out maintenance, inspection, and repair in non-loading condition.
Is there any abnormality found during maintenance and inspection?
Ensure the hoist is not used if any abnormality is found.
Pre-Inspection Checklist
Follow the proper inspection method for safe operation of the electric chain hoist.
Switch OFF the power source and reconfirm the safety of the surrounding area before inspection.
MaintainX CoPilot is your expert colleague, on call 24/7, helping your team find the answers they need to keep equipment running.
Reduce Unplanned Downtime
Ensure your team follows consistent procedures to minimize equipment failures and costly delays.
Maximize Asset Availability
Keep your assets running longer and more reliably, with standardized maintenance workflows from OEM manuals.
Lower Maintenance Costs
Turn any technician into an expert to streamline operations, maintain more assets, and reduce overall costs.
Thousands of companies manage their assets with MaintainX













