ELEPHANT CHAIN BLOCK Chain Hoist FA-0.9S

Switch OFF the power source of the electric chain hoist

Ensure the hoist is in a non-loading condition (hoisting no load)

Confirm the safety of the surrounding area

Inspect the chain bucket for any visible damage

Check if the lifting lug of the chain bucket is fitted properly

Ensure there is no dust or water left in the chain bucket

Measure the free length of the switch spring on the no-load side

Switch OFF the power source before starting maintenance.

Ensure maintenance is performed by qualified personnel or contact a dealer.

Confirm the hoist is in a non-loading condition (hoisting no load).

Do not use the hoist if any abnormality is found during inspection.

Follow the proper inspection method for safe operation.

Switch OFF the power source and confirm the safety of the surrounding area.

Lower the hoist to about 10 cm before the safety actuation point in the lower limit.

Switch OFF the power source before starting maintenance, inspection, or repair work.

Ensure maintenance, inspection, and repair work is done by persons with specialized knowledge or consult a dealer.

Perform maintenance, inspection, and repair in a non-loading condition.

If any abnormality is found during maintenance and inspection, do not use the hoist.

Follow the proper inspection method to ensure safe and full-functioned operation of the electric chain hoist.

Ensure the power source of the electric chain hoist is completely switched OFF and the safety of the surrounding area is reconfirmed.

If making an overhaul, ensure the electric chain hoist is placed on the ground.

Ensure no modifications are made to the electric chain hoist and its accessories.

Verify only genuine parts are used.

Confirm no shortening or lengthening of the load chain has been done.

Ensure power source is turned off before maintenance, inspection, or repair.

Verify only authorized specialists are performing maintenance, inspection, or repair.

Ensure maintenance, inspection, or repair is carried out with the hoist unloaded.

Check for any disorders found during maintenance or inspection and ensure repairs are made before re-operation.

Switch OFF the power source before maintenance, inspection, and repair work.

Ensure maintenance, inspection, and repair work is done by qualified personnel or a dealer.

Perform maintenance, inspection, and repair in non-loading condition.

Is the hoist free from abnormalities? If not, do not use the hoist.

Follow the proper inspection method for safe operation of the electric chain hoist.

Switch OFF the power source and confirm the safety of the surrounding area.

Ensure the electric chain hoist is on the ground for overhaul.