Daikin Dedicated Outdoor Air System WGOV025K1RFBBKB002000S7500

Unscrew the filter from the probe

Rinse the filter under warm water until clean

Use warm soapy water if necessary

Screw the filter back into the probe

Ensure the filter is screwed all the way into the probe

Install field sensors and land wires on the terminal block

LOCKOUT/TAGOUT all power sources prior to wiring or servicing the unit

Disconnect electric power before servicing equipment

Check unit configuration settings prior to operating the unit

Open water valves to full-open position and turn on power to the conditioner

Enter Loop Water Type, CFM, Static Pressure, and Elevation

Set all installed sensors to ‘Installed’ and configure digital outputs if used

Enable trending if an SD card is installed in the main control board

Check for dirt in the water system

Is the system charged with OEM recommended lubricant for R-410A?

Apply OEM recommended lubricant to the system

Ensure no leaks are present after lubrication

Check filters at 60-day intervals

Can light be seen through the filter when held up to sunlight or a bright light?

Is filter replacement required based on light visibility?

Describe any issues encountered during the inspection

Is a more critical standard for filter inspection desirable?