Contec Medical Systems Patient Monitor CMS7000

Use a soft cloth with detergent to wipe the contact position between the probe and the patient until there is no obvious dirt.

Use a new cloth or paper towel with tap water to wipe the residual detergent until there is no obvious dirt.

Use a dry soft cloth to wipe the residual water.

Place the probe in a ventilated and shady environment for air drying.

Use a soft cloth with detergent to wipe the lead cable surface until no obvious dirt remains.

Use a new cloth or paper towel with tap-water to wipe off residual detergent until no obvious dirt remains.

Use a dry soft cloth to wipe off residual water.

Place the cable in a ventilated and shady environment for air drying.

Use a soft cloth with detergent to wipe the lead cable surface until no obvious dirt remains.

Use a new cloth or paper towel with tap water to wipe off residual detergent until no obvious dirt remains.

Use a dry soft cloth to wipe off residual water.

Place the lead cable in a ventilated and shady environment for air drying.

Turn off the power and unplug the power cord

Use a soft cloth with proper detergent to wipe the external surface

Use a new cloth or paper towel with tap water to remove residual detergent

Place the device in a ventilated and shady environment for air drying

Ensure the device is switched off and disconnected before cleaning

Cleaning the Probe and Lead Cable

Use a soft cloth with detergent to wipe the probe and lead cable surface until no obvious dirt remains.

Use a cotton swab with detergent to wipe the contact position between the probe and the patient until no obvious dirt remains.

Use a new cloth or paper towel with tap water to wipe away residual detergent until no obvious dirt remains.

Use a dry soft cloth to wipe away residual water.

Place the probe in a ventilated and shady environment for air drying.