TCM Corporation Forklift Truck FG18T13

Check for clutch noise and proper disengagement

Check for clutch slipping and proper engagement

Check master cylinder and release cylinder for fluid leaks

Check the function of booster (trucks with power clutch)

Check booster for oil leaks (trucks with power clutch)

Check shift levers for operation and looseness

Ensure the forklift is turned off before starting the replacement

Verify that the replacement bulb is of the same capacity as the original

Identify the bulb to be replaced

Remove the burnt-out bulb carefully

Install the new bulb ensuring it is securely fitted

Test the new bulb to ensure it is functioning correctly

TD27-II, QD32, C240 Sedimenter Maintenance

Turn the drain cock (plug) 4 or 5 turns to loosen it

Pump the priming pump a few times to drain water from inside the sedimenter

Tighten the drain cock (plug) securely

Pump the priming pump a few more times to ensure no fuel leak from the drain cock (plug)

Wipe away any spilt fuel from areas around the sedimenter

Start the engine and check if the sedimenter warning light is off

D1503, V3300 Sedimenter Maintenance

D1503 Engine Air Bleeding System

Turn the starter switch to the 'ON' position

Ensure the electromagnetic fuel pump operates to send fuel to the nozzle holder and fuel piping

Verify that any bubbles in the fuel are automatically bled into the fuel tank

Start the engine and check for fuel leaks in the fuel system

TD27-II, QD32 Engine Air Bleeding

Loosen the air bleeding plug of the fuel filter (sedimenter)

Pump the priming pump until the fuel coming from the plug hole is free from bubbles

Reinstall the air bleeding plug securely