TCM Corporation Forklift Truck FHG20T3

Check for the entrance of air into braking piping

Check for damage, leaks or interference

Check for loose connections or clamp

Check brake drum for loose installation

Use fuses of the specific ampere rating

Are all components in the circuit operating properly?

Is every component in a circuit not functioning?

Replace the blown fuse with a spare fuse of the same capacity and color

Do some components in the circuit not function properly?

Ensure waste oil is disposed of by a specialist.

Avoid changing engine oil immediately after shutdown to prevent burns.

Start the engine and let it run at low rpm to warm it up.

Park the truck on a level surface.

Engage the parking brake fully, shut off the engine, and remove the starter key.

Check crankcase air breather for contamination and clean if needed

Check carburetor for loose linkage and contamination

Replace the following safety parts

Verify the installation of the new power steering hose

Verify the installation of the new reserve tank tubing

Verify the installation of the new fuel hose

Verify the installation of the new rubber parts inside power steering unit

Verify the installation of the new brake hose

Verify the installation of the new lift chain