Baldor Reliance Electric Motor EM2333T

Refer to motor nameplate for lubricant information

Use only clean, fresh grease from clean containers

Has grease compatibility been checked and verified?

Contact Baldor District Office for compatibility questions, if any

Select the operating temperature range and corresponding lubricant

Ensure safety precautions are followed if lubrication is done with motor running

Ensure not to over-lubricate motor

Storage — Non-Regreaseable Motors

Rotate the motor shaft 15 times to redistribute the grease within the bearing

Rotate ball and roller bearing motor shafts manually

Has the motor been greased in the last 6 months?

Section 3 — Maintenance general principles

Record the current oil level in the sight gauge

Is the oil level at the midpoint of the sight gauge when the motor is at rest?

Is the oil level at the midpoint of the sight gauge when the motor is in operation?

Adjust oil level if necessary to reach the midpoint of the sight gauge

Storage — All Other Motor Types

Add additional grease to each bearing

Section 3 — Periodic Inspection

Listen for any abnormal noises and check cause immediately

Check for any vibration and check cause immediately if excessive vibration is found

Check voltage and frequency variations

Check power supply total harmonic distortion

Periodic checks of phase, voltage, frequency, and power consumption

Check to see that air filters are in place and clean

Check all air passages and ensure that they are not blocked or clogged