Baldor Reliance Electric Motor EJMM3218T

Storage — Non-Regreaseable Motors

Rotate the motor shaft 15 times to redistribute the grease within the bearing

Rotate ball and roller bearing motor shafts manually

Has the motor been greased in the last 6 months?

Storage — All Other Motor Types

Add additional grease to each bearing

Ensure sleeve bearing (oil lube) motors are drained of oil prior to shipment

Refill oil reservoirs to the indicated level with the specified lubricant

Section 3 — Lubrication Procedure

Ensure lubrication is done with the motor running, stay clear of rotating parts and electrical circuits

Avoid over-lubrication of the motor

Is the shaft stationary and the motor warm for relubrication?

Locate the grease inlet, clean the area and replace the pipe plug with a grease fitting if necessary

Is grease caked around the plug?

Clean caked grease with a wooden stick or suitable tool

Is there severe caking at the plug?

Section 3 — Lubrication Procedure

Ensure lubrication is done with the motor stationary and warm

Locate the grease inlet and clean the area

Is the motor equipped with grease fittings?

Replace the pipe plug with a grease fitting if not equipped

Is grease caked around the plug?

Clean caked grease with a wooden stick or suitable tool

Is there severe caking at the plug?