SureShot Dispensing Systems Refrigerated Liquid Dispenser AC110­-PC IntelliShot

Remove the tank from the dispenser when the product has run out.

Remove and discard the product delivery tube from the tank.

Rinse the tank and cover with lukewarm potable water.

If hand washing, use a pot brush and wash thoroughly with a general cleaner.

If using a dishwasher, place the tank and cover in the dishwasher and wash on the pot cycle.

Prepare a container of warm, soapy water before disassembling the valve.

Ensure not to dislodge the cable during cleaning.

Turn the power to the dispenser OFF.

Drain product tanks and remove empty tanks.

Open the door to the refrigerated product compartment.

Remove the catch tray by lifting it up and off, if applicable.

Remove the 4 pan-head screws securing the front splash panel/valve cover and carefully remove it.

Remove the product case from the refrigerated product compartment of the dispenser

Wash with hot, soapy water or an approved sanitary cleaning product

Rinse with hot, clear water to remove soap residue

Is the case cleaned each time the valve is cleaned or more frequently if required?

Is there any ice build-up in the dispenser?

Gently remove ice build-up, if any ice forms.

Is the ice build-up removed during a defrost cycle?

Unplug the dispenser and leave the door open for about 15 minutes to allow ice to soften.

Is a temperature adjustment required?

If temperature adjustment is required, describe the issue.

Cleaning the Exterior of the Dispenser

Use a soft, dry cloth to wipe down the exterior surfaces of the dispenser.

Wash the stainless steel exterior surfaces with warm, soapy water.

If the water is hard, did you wipe the dispenser dry with a soft cloth to prevent water spotting?

Use stainless steel polish if necessary, ensuring it is sprayed on a cloth before use.

Wipe the front of the dispenser clean.