SureShot Dispensing Systems Refrigerated Liquid Dispenser AC210­-PC IntelliShot

Remove the tank from the dispenser when the product has run out.

Remove and discard the product delivery tube from the tank.

Rinse the tank and cover with lukewarm potable water.

If hand washing, use a pot brush and wash thoroughly with a general cleaner.

Ensure water temperature is at least 140º F or 60º C.

Use a bottle brush to clean all corners and crevices.

Catch Tray Removal and Initial Rinse

Remove the catch tray by lifting it up and off. Does the dispenser have a catch tray?

Rinse the tray with lukewarm potable water

Ensure the water temperature is at least 140ºF or 60ºC

Add a good quality general cleaner to the hot wash water

Wash the tray thoroughly using a bottle brush

Is a dishwasher available at the location?

Remove the product case from the refrigerated product compartment of the dispenser

Wash with hot, soapy water or an approved sanitary cleaning product

Rinse with hot, clear water to remove soap residue

Was the product case cleaned each time the valve was cleaned, or more frequently if required?

Check for ice build-up in the refrigerated product compartment

Remove and discard any accumulated ice

Wipe the interior with a soft cloth

Is there any ice build-up in the dispenser?

Gently remove ice build-up, if any ice forms.

Is the ice build-up removed during a defrost cycle?

Unplug the dispenser and leave the door open for about 15 minutes to allow the ice to soften.

Is a temperature adjustment required?

If temperature adjustment is required, describe the issue.