Turn manuals into instant answers
with your AI-powered assistantTurn manuals into instant answers
with your AI-powered assistant
Get instant access to all the maintenance information you need. Empower technicians to perform preventive maintenance with asset packages, ready to use right out of the box.
Find all the essential guides in one place.
Tensioning Guide
Belt-diagram
C-120 pulleys
+ 13 more
Pre-built workflows to keep your asset running smoothly.
Daily Electrical System Inspection
Replace Roller and Pulley
Install Engine B-120
+ 29 more
Integrate maintenance plans directly into your work orders.
Motion Industries
Applied Industrial Technologies
Electrical Brothers
+ 5 more
Access the parts list for your equipment in MaintainX.
Drive Motor
B2 Rollers
Tensioning System
+ 40 more

Mitsubishi Split-Type, Heat Pump Air Conditioner PUZ-A42NHA2
Create an account to install this asset package.
Integrate maintenance plans directly into your work orders in MaintainX.
Electrical Parts Box Disassemble
Remove the service panel
Remove the top panel
Disconnect the indoor/outdoor connecting wire from terminal block
Remove all the following connectors from controller circuit board
Remove a screw (4 ✕ 8) from the valve bed to remove the lead wire
Pull out the disconnected wire from the electrical parts box
Remove the terminal cover and disconnect the
Remove an electrical parts box fixing screw (4 ✕ 10) and detach the electrical parts box by pulling it upward
The electrical parts box is fixed with 2 hooks on the left and 1 hook on the right.
Fan Motor Disassemble
Remove the service panel
Remove the top panel
Remove 5 fan grille fixing screws (5 ✕ 10)
Detach the fan grille
Remove a nut (for right handed screw of M6) to detach the propeller
Disconnect the connectors, CNF1, CNF2 on controller circuit board in electrical parts box
Remove 4 fan motor fixing screws (5 ✕ 25)
Detach the fan motor
Upload a photo of the disassembled fan motor
4-Way Valve Coil and Linear Expansion Valve Coil Disassemble
(1) Remove the service panel. (See figure 1.)
(2) Remove the top panel. (See figure 1.)
[Removing the 4-way valve coil]
(3) Remove 4-way valve coil fixing screw (M4 ✕ 6).
(4) Remove the 4-way valve coil by sliding the coil toward you.
(5) Disconnect the connector 21S4 (green) on the controller circuit board in the electrical parts box.
[Removing the linear expansion valve coil]
(3) Remove the linear expansion valve coil by sliding the coil upward.
(4) Disconnect the connectors, LEV-A (white), on the controller circuit board in the electrical parts box.;
Compressor Disassemble
Upload a photo of the service panel before removal
Service panel removed
Upload a photo of the top panel before removal
Top panel removed
Upload a photo of the front cover panel before removal
Front cover panel removed
Upload a photo of the back cover panel before removal
Back cover panel removed
Upload a photo of the electrical parts box before removal
Linear Expansion Valve Disassemble
Remove the service panel
Upload a photo of the service panel removed
Remove the top panel
Upload a photo of the top panel removed
Remove 3 valve bed fixing screws (4 ✕ 10), 4 ball valve and stop valve fixing screws (5 ✕ 16), then remove the valve bed
Upload a photo of the valve bed removed
Remove 4 right side panel fixing screw (5 ✕ 10) in the rear of the unit and then remove the right side panel
Upload a photo of the right side panel removed
Remove the linear expansion valve
Access the parts list for your equipment in MaintainX.
Inverter Starter Type,Hermetic Compressor - 2,5 KW
ANV33FDJMT
Inverter Starter Type,Hermetic Compressor - 2,5 KW
ANV33FDJMT
Inverter Starter Type,Hermetic Compressor - 2,5 KW
ANV33FDJMT
MaintainX CoPilot is your expert colleague, on call 24/7, helping your team find the answers they need to keep equipment running.
Reduce Unplanned Downtime
Ensure your team follows consistent procedures to minimize equipment failures and costly delays.
Maximize Asset Availability
Keep your assets running longer and more reliably, with standardized maintenance workflows from OEM manuals.
Lower Maintenance Costs
Turn any technician into an expert to streamline operations, maintain more assets, and reduce overall costs.
Thousands of companies manage their assets with MaintainX













