Mac-Lander Flatbed Trailer 18GFHSB

Check and record tire pressure for each tire

Inspect tires for wear and damage

Check and record torque levels of wheel’s lug nuts

Inspect lug nuts for damage or wear

Is the trailer blocked and secured before changing a tire?

Does the jack capacity match the trailer weight?

Refer to tire pamphlet in the operator's manual for complete tire safety information

Measure the tire pressure for each tire

Is the tire pressure within the recommended range for all tires?

Check each tire for signs of wear and damage

Are all tires free from significant wear and damage?

Describe any issues found during the inspection

Ensure wiring and connections are secure

Is there any sign of a short or open circuit?

Charge the battery periodically as per manual instructions

Wear protective gear to avoid acid burns

Ensure proper ventilation to avoid gas explosion

Tighten lug nuts initially to 15-20 lbs using cross tightening sequence

Finish tightening lug nuts to 80-90 ft. lbs for 1/2 studs

Retorque lug nuts after first 50 miles of use

Initial tightening to 15-20 lbs using cross tightening sequence

Final tightening to 80-90 ft. lbs for 1/2 studs

Retorque after first 50 miles of use