

Turn manuals into instant answers
with your AI-powered assistantTurn manuals into instant answers
with your AI-powered assistant
Get instant access to all the maintenance information you need. Empower technicians to perform preventive maintenance with asset packages, ready to use right out of the box.
Find all the essential guides in one place.
Tensioning Guide
Belt-diagram
C-120 pulleys
+ 13 more
Pre-built workflows to keep your asset running smoothly.
Daily Electrical System Inspection
Replace Roller and Pulley
Install Engine B-120
+ 29 more
Integrate maintenance plans directly into your work orders.
Motion Industries
Applied Industrial Technologies
Electrical Brothers
+ 5 more
Access the parts list for your equipment in MaintainX.
Drive Motor
B2 Rollers
Tensioning System
+ 40 more

Ingersoll Rand Diaphragm Pump PD10E-FES-PGA
Create an account to install this asset package.
Integrate maintenance plans directly into your work orders in MaintainX.
Major Valve Reassembly
Spool and Valve Block Assembly
Install new 'U' cups on spool
Ensure lips of 'U' cups face each other
Insert spool into valve block
End Cap and Valve Block Assembly
Install gasket on end cap
Assemble end cap to valve block
Secure with end plates and screws
Tighten screws to specified torque
Diaphragm Pump Maintenance
Preparation
Provide a clean work surface to protect sensitive internal moving parts from contamination.
Ensure all necessary tools and equipment are available.
Service Activity Records
Keep good records of service activity.
Include pump in preventive maintenance program.
Pre-Disassembly
Empty captured material in the outlet manifold by turning the pump upside down.
Is the pump completely drained of material?
Pilot Valve Reassembly
Preparation
Clean parts not being replaced from service kit
Lubricate parts not being replaced from service kit
O-Ring and Sleeve Installation
Install new (171 and 172) “O” rings
Replace (170) sleeve
Seal and O-Ring Installation
Install new (168) “O” rings
Install (169) seal, noting the lip direction
Pilot Valve Disassembly
Disassembly Steps
Lightly tap on part (118) to expose the opposite (121) sleeve, (167) pilot piston, and other parts.
Remove part (170) sleeve.
Inspect inner bore of sleeve (170) for damage.
Fluid Section Reassembly
Preparation
Clean all parts
Inspect all parts for wear or damage
Replace worn or damaged parts with new parts
Lubrication
Lubricate diaphragm rod with Lubriplate FML-2 grease
Lubricate 'U' cup with Lubriplate FML-2 grease
Diaphragm Installation
Install Santoprene diaphragm with 'AIR SIDE' towards pump center body
Access the parts list for your equipment in MaintainX.
Rod, Carbon Steel
95995
Backup Washer, Stainless Steel
95990-1
Diaphragm Screw, Polypropylene
96108-1
Fluid Cap, Groundable Polypropylene
96105-3
Screw, M8 x 1.25 - 6g x 30 mm, Stainless Steel
95880
Rod, Carbon Steel
95995
Backup Washer, Stainless Steel
95990-1
Diaphragm Screw, Polypropylene
96108-1
Fluid Cap, Groundable Polypropylene
96105-3
Screw, M8 x 1.25 - 6g x 30 mm, Stainless Steel
95880
Rod, Carbon Steel
95995
Backup Washer, Stainless Steel
95990-1
Diaphragm Screw, Polypropylene
96108-1
Fluid Cap, Groundable Polypropylene
96105-3
Screw, M8 x 1.25 - 6g x 30 mm, Stainless Steel
95880
MaintainX CoPilot is your expert colleague, on call 24/7, helping your team find the answers they need to keep equipment running.
Reduce Unplanned Downtime
Ensure your team follows consistent procedures to minimize equipment failures and costly delays.
Maximize Asset Availability
Keep your assets running longer and more reliably, with standardized maintenance workflows from OEM manuals.
Lower Maintenance Costs
Turn any technician into an expert to streamline operations, maintain more assets, and reduce overall costs.
Thousands of companies manage their assets with MaintainX













