Mac-Lander Flatbed Trailer 25TTAWC

Initial tightening to 15-20 lbs using cross tightening sequence

Final tightening to 80-90 ft. lbs for 1/2 studs

Retorque after first 50 miles of use

Check that all tires are properly inflated

Inspect tires for wear and damage

Is the tire pamphlet available in the operator's manual?

Record any issues found during inspection

Are all trailer lights operational?

Check operation of the following lights

Inspect condition of reflector lenses

Replace damaged or inoperative bulbs

Check the break-away system wiring and connections

Is there any sign of a short or open circuit?

Charge the battery periodically as per the manual instructions

Wear protective gear to avoid contact with battery acid

Ensure the area is well-ventilated to prevent gas accumulation

Check tire pressure and adjust to specified level

Are the brakes working properly?

Is the load properly secured and not overloaded?

Secure ramps in the appropriate storage area

Ensure security of trailer components

Ensure jack is raised to highest position