Mac-Lander Flatbed Trailer 18TFSWB

Are all trailer lights operational?

Check operation of the following lights

Inspect condition of reflector lenses

Replace damaged or inoperative bulbs

Initial tightening to 15-20 lbs using cross tightening sequence

Final tightening to 80-90 ft. lbs for 1/2 studs

Retorque after first 50 miles of use

Inspect your trailer before use to ensure that all nuts and bolts are fully tightened

Load trailer on a flat and level surface

Check tire pressure. Bring to specified level.

Ensure that brakes are working properly

Make sure the load is properly secured and that the trailer is not overloaded

Check that all electrical connections, lights and reflectors are in proper working order

Secure ramps in the appropriate storage area

Make sure safety chain, hitching mechanisms, and gates are secured

Check tire pressure for proper inflation

Inspect tires for wear and damage

Check torque levels of wheel’s lug nuts

Inspect lug nuts for damage or wear

Block and secure trailer before changing a tire

Is the jack capacity appropriate for the trailer weight?

Wear protective gloves and eyewear

Ensure the area is well-ventilated

Check the break-away system wiring and connections

Is there any sign of corrosion on the battery terminals?

Is the battery charge level adequate?

Charge the battery if necessary