Mac-Lander Flatbed Trailer 20TFMWS

Verify operation of all trailer lights

Are all trailer lights lit when tow unit lights are on?

Is the ignition switch on to activate turn signals?

Check if reflector lenses are clean and unbroken

Replace bulbs if damaged or inoperative

Replace lenses if damaged or inoperative

Initial tightening to 15-20 lbs using cross tightening sequence

Final tightening to 80-90 ft. lbs for 1/2 studs

Retorque after first 50 miles of use

Ensure all tires are properly inflated

Inspect tires for wear and damage

Is the tire pressure within the recommended range for all tires?

Is there any visible damage or excessive wear on any tire?

Describe any issues found during the inspection

Load trailer on a flat and level surface

Is the tire pressure at the specified level?

Are the brakes working properly?

Is the load properly secured and not overloaded?

Secure ramps in the appropriate storage area

Wear protective gloves and eyewear

Is there any sign of corrosion on the battery terminals?

Charge the battery as per manual instructions

Is the break-away system functioning properly?