Ingersoll Rand Diaphragm Pump PD10E-FES-PAG

Clean parts not being replaced from service kit

Lubricate parts not being replaced from service kit

Install new (171 and 172) “O” rings

Inspect all parts for wear or damage

Replace worn or damaged parts with new parts

Lubricate diaphragm rod with Lubriplate FML-2 grease

Lubricate 'U' cup with Lubriplate FML-2 grease

Install Santoprene diaphragm with 'AIR SIDE' towards pump center body

Ensure 'U' cup lips face each other

End Cap and Valve Block Assembly

Assemble end cap to valve block

Secure with end plates and screws

Tighten screws to specified torque

Provide a clean work surface to protect sensitive internal moving parts from contamination.

Keep good records of service activity.

Empty captured material in the outlet manifold by turning the pump upside down to drain material.

Include pump in preventive maintenance program.

Valve Block and Adapter Plate Removal

Adapter Plate and Valve Insert Removal

Insert a small flat blade screwdriver into the notch in the side of 135 valve block

Push in on tab to remove 233 adapter plate