Mac-Lander Flatbed Trailer 18TFMSB

Tighten lug nuts to 15-20 lbs. using cross tightening sequence

Finish tightening lug nuts to 80-90 ft. lbs. for 1/2 studs

Retorque lug nuts after first 50 miles of use

Ensure wiring and connections are secure

Is there any sign of a short or open circuit?

Charge the battery periodically as per manual instructions

Wear protective gear to avoid acid burns

Ensure proper ventilation to avoid gas explosion

Verify operation of all trailer lights

Are all trailer lights lit when tow unit lights are on?

Check if reflector lenses are clean and unbroken

Replace damaged or inoperative components

Did bulb replacement fix the light issue?

Describe any issues with wiring or light assembly

Ensure all tires are properly inflated

Inspect tires for wear and damage

Is the tire pressure within the recommended range for all tires?

Is there any visible damage or excessive wear on any tire?

Describe any issues found during the inspection

Initial tightening to 15-20 lbs using cross tightening sequence

Final tightening to 80-90 ft. lbs for 1/2 studs

Retorque after first 50 miles of use