Ingersoll Rand Diaphragm Pump PD10E-FES-PTT

Provide a clean work surface to protect sensitive internal moving parts from contamination.

Keep good records of service activity.

Include pump in preventive maintenance program.

Empty captured material in the outlet manifold by turning the pump upside down to drain material.

Inspect all parts for wear or damage

Replace worn or damaged parts with new parts

Lubricate diaphragm rod with Lubriplate FML-2 grease

Lubricate 'U' cup with Lubriplate FML-2 grease

Install Santoprene diaphragm with 'AIR SIDE' towards pump center body

Remove the following components

Remove the diaphragm washer (6)

Select the type of diaphragm to remove

Ensure no scratches or marks on the diaphragm rod (1)

Clean parts not being replaced from service kit

Lubricate parts not being replaced from service kit

Install new (171 and 172) “O” rings

Install (169) seal, noting the lip direction

Ensure 'U' cup lips face each other

Assemble end cap to valve block

Tighten screws to specified torque

Valve Insert and Plate Assembly