

Turn manuals into instant answers
with your AI-powered assistantTurn manuals into instant answers
with your AI-powered assistant
Get instant access to all the maintenance information you need. Empower technicians to perform preventive maintenance with asset packages, ready to use right out of the box.
Find all the essential guides in one place.
Tensioning Guide
Belt-diagram
C-120 pulleys
+ 13 more
Pre-built workflows to keep your asset running smoothly.
Daily Electrical System Inspection
Replace Roller and Pulley
Install Engine B-120
+ 29 more
Integrate maintenance plans directly into your work orders.
Motion Industries
Applied Industrial Technologies
Electrical Brothers
+ 5 more
Access the parts list for your equipment in MaintainX.
Drive Motor
B2 Rollers
Tensioning System
+ 40 more

Greenheck Dedicated Outdoor Air Unit RVE-150
Create an account to install this asset package.
Integrate maintenance plans directly into your work orders in MaintainX.
Polymer Wheel Cleaning
Preparation
Remove wheel segments from the wheel cassette to avoid splashing liquids inside the cabinet.
Cleaning Process
Is the energy wheel excessively dirty?
Select the cleaning method used
Did you avoid using aggressive organic solvents like acetone?
Soaking (if necessary)
Did you soak the wheel segments overnight for stubborn dirt removal?
Post-Cleaning
Polymer Wheel Belt Inspection
Belt Inspection
Inspect belts for signs of wear such as being chewed up or leaving belt dust near the motor pulley.
Is there any belt dust near the motor pulley?
Wheel Inspection
Inspect wheel for smooth and unrestricted rotation.
Does the wheel rotate smoothly and without restriction?
Belt Replacement
Does the belt require replacement?
Contact the local manufacturer representative if replacement is needed.
1 Yearly Dampers Check
Manual Check of Backdraft Dampers
Check if backdraft damper blades open freely by hand
Check if backdraft damper blades close freely by hand
Motorized Dampers Functionality Test
Apply power to motorized dampers
Ensure actuator opens the damper as designed
Ensure actuator closes the damper as designed
9000 Hourly / 1 Yearly UV-C Lamp Maintenance
Pre-Maintenance Safety
Read the maintenance instructions before opening and applying power to the appliance.
Disconnect the appliance from the supply mains before cleaning, maintenance, or replacement of the UV-C Lamps.
UV-C Lamp Inspection and Replacement
Check bulbs for cracks or damage
Have the bulbs been in use for more than 1 year or 9,000 hours?
Replace bulbs if they have been in use for more than 1 year or 9,000 hours.
Post-Maintenance Check
Is the appliance functioning properly after maintenance?
1 Yearly Unit Check
General Inspection
Check for cleanliness
Check all fasteners for tightness
Check for fatigue, corrosion, wear
Access the parts list for your equipment in MaintainX.
Factory Lamp 33 inch
482792
Factory Lamp 20 inch
485072
Factory Lamp 33 inch
482792
Factory Lamp 20 inch
485072
Factory Lamp 33 inch
482792
Factory Lamp 20 inch
485072
MaintainX CoPilot is your expert colleague, on call 24/7, helping your team find the answers they need to keep equipment running.
Reduce Unplanned Downtime
Ensure your team follows consistent procedures to minimize equipment failures and costly delays.
Maximize Asset Availability
Keep your assets running longer and more reliably, with standardized maintenance workflows from OEM manuals.
Lower Maintenance Costs
Turn any technician into an expert to streamline operations, maintain more assets, and reduce overall costs.
Thousands of companies manage their assets with MaintainX













