

Turn manuals into instant answers
with your AI-powered assistantTurn manuals into instant answers
with your AI-powered assistant
Get instant access to all the maintenance information you need. Empower technicians to perform preventive maintenance with asset packages, ready to use right out of the box.
Find all the essential guides in one place.
Tensioning Guide
Belt-diagram
C-120 pulleys
+ 13 more
Pre-built workflows to keep your asset running smoothly.
Daily Electrical System Inspection
Replace Roller and Pulley
Install Engine B-120
+ 29 more
Integrate maintenance plans directly into your work orders.
Motion Industries
Applied Industrial Technologies
Electrical Brothers
+ 5 more
Access the parts list for your equipment in MaintainX.
Drive Motor
B2 Rollers
Tensioning System
+ 40 more

Greenheck Make-Up Air Unit IGX-P120-H22-MF-H
Create an account to install this asset package.
Integrate maintenance plans directly into your work orders in MaintainX.
Initial Equipment Inspection
Verification of Received Parts
Verify all required parts and correct quantity received
Are all items on the bill of lading accounted for?
Report any shortages to local representative
Inspection of Unit Cabinet
Inspect interior of unit cabinet for any shipped loose items
Are there any loose items inside the cabinet?
Storage and Handling
Are temperatures maintained evenly to prevent condensation?
1 Monthly Equipment Inspection
Inspection and Maintenance Record
Record inspection and maintenance performed
Moisture and Dirt Accumulation
Check for moisture or dirt accumulations on parts
Describe source of moisture or dirt if found
Fan Wheel Maintenance
Rotate the fan wheel by hand
Paint and Coating Maintenance
Check for paint deterioration
1 Yearly Heat Exchanger Inspection
Visual Inspection
Inspect the heat exchanger for cracks
Inspect the tubes for discoloration
Airflow Check
Is the blower operating properly?
Post Inspection Actions
Was the heat exchanger replaced?
Was the blower adjusted or repaired?
Supply Wheel and Snow Accumulation Cleaning
Safety Precautions
Lock-out the gas supply to the unit
Lock-out the electrical power to the unit
Supply Wheel Cleaning
Check for oil and dust accumulation on the wheel
Clean the wheel and housing if oil and dust accumulation is found
Snow Accumulation Cleaning
Clear snow away from roof mounted units
Ensure snow is clear of the intake and access doors
Cooling Coil Maintenance
Safety Precautions
Lock-out the gas supply to the unit
Lock-out the electrical power to the unit
Inspection and Repair
Inspect the coil for signs of corrosion and/or leaks
Describe any corrosion or leaks found
Repair any leaks as required
Cleaning Procedures
Inspect the coil's surface for foreign material
Access the parts list for your equipment in MaintainX.
Auto Drain and Fill Valve 1/2 Inch (13 Mm)
461262
Auto Drain and Fill Valve 1/4 Inch (6 Mm)
461263
Auto Drain and Fill Valve 3/4 Inch (19 Mm)
461264
Auto Drain and Fill Valve 1/2 Inch (13 Mm)
461262
Auto Drain and Fill Valve 1/4 Inch (6 Mm)
461263
Auto Drain and Fill Valve 3/4 Inch (19 Mm)
461264
Auto Drain and Fill Valve 1/2 Inch (13 Mm)
461262
Auto Drain and Fill Valve 1/4 Inch (6 Mm)
461263
Auto Drain and Fill Valve 3/4 Inch (19 Mm)
461264
MaintainX CoPilot is your expert colleague, on call 24/7, helping your team find the answers they need to keep equipment running.
Reduce Unplanned Downtime
Ensure your team follows consistent procedures to minimize equipment failures and costly delays.
Maximize Asset Availability
Keep your assets running longer and more reliably, with standardized maintenance workflows from OEM manuals.
Lower Maintenance Costs
Turn any technician into an expert to streamline operations, maintain more assets, and reduce overall costs.
Thousands of companies manage their assets with MaintainX













