

Turn manuals into instant answers
with your AI-powered assistantTurn manuals into instant answers
with your AI-powered assistant
Get instant access to all the maintenance information you need. Empower technicians to perform preventive maintenance with asset packages, ready to use right out of the box.
Find all the essential guides in one place.
Tensioning Guide
Belt-diagram
C-120 pulleys
+ 13 more
Pre-built workflows to keep your asset running smoothly.
Daily Electrical System Inspection
Replace Roller and Pulley
Install Engine B-120
+ 29 more
Integrate maintenance plans directly into your work orders.
Motion Industries
Applied Industrial Technologies
Electrical Brothers
+ 5 more
Access the parts list for your equipment in MaintainX.
Drive Motor
B2 Rollers
Tensioning System
+ 40 more

Goodman Gas Furnace GCES960403BNAA
Create an account to install this asset package.
Integrate maintenance plans directly into your work orders in MaintainX.
Electronic Air Cleaner Inspection
Pre-Inspection Setup
Ensure the air cleaner is installed in the correct position (not with the access door facing down).
Verify the air cleaner is located in the return air duct next to the blower compartment.
Electronic Air Cleaner Inspection
Inspect the accessibility of the electronic air cleaner for periodic inspection and cleaning.
Check the pre-filters for cleanliness and clean if necessary.
Inspect the electronic cells for cleanliness and clean if necessary.
Media Air Cleaner Inspection
Ensure the media air cleaner is accessible for periodic inspection and replacement of the filter cartridge.
1 Yearly Furnace Inspection
WARNING: HIGH VOLTAGE
Disconnect all power before servicing or installing the unit
Check the following furnace components for proper working order
Ignitor Handling Precautions
Was the ignitor handled with care, avoiding bare fingers, rough handling, or vibration?
Post Inspection
Were all necessary repairs or services performed?
Technician's signature
Heating Performance Test
Preparation
Ensure all other gas appliances are turned off
Ensure the heating cycle has been in operation for at least fifteen minutes
Gas Meter Clocking
Record the time (in seconds) for one complete revolution of the cubic foot dial on the gas meter
BTU Input Calculation
Enter the number of cubic feet of gas consumed per hour
Enter the calorific value of the gas (BTU per cubic foot)
Calculate the BTU input by multiplying the cubic feet of gas consumed per hour by the calorific value
2 Monthly Filter Replacement
WARNING: HIGH VOLTAGE
Disconnect all power sources before servicing
Verify power disconnection from all sources
Filter Maintenance
Is the filter permanent?
Clean the permanent filter if applicable
Replace the disposable filter if applicable
Was the filter replaced with the same type and size?
Post Maintenance
Pressure Regulator Adjustment
Safety Precautions
Connect a manometer to the outlet tap at the gas valve before adjusting the pressure regulator.
Pressure Regulator Adjustment
Record the initial manifold pressure in inches of water column.
Is the manifold pressure within the acceptable range for natural gas (3.5 inches water column ± 3 inches) or propane gas (10 inches water column ± 3 inches)?
Adjust the pressure regulator direction
Record the final manifold pressure in inches of water column after adjustment.
Propane Gas Specific Instructions
Is the second stage supply line pressure regulator adjusted to give 10 inches water column with all other gas consuming appliances running?
Access the parts list for your equipment in MaintainX.
Electronic Air Cleaner
GSAS
Electronic Air Cleaner
ASAS
Media Air Cleaner
GMU
Media Air Cleaner
AMU
Filter Cartridge
M0-1056
Electronic Air Cleaner
GSAS
Electronic Air Cleaner
ASAS
Media Air Cleaner
GMU
Media Air Cleaner
AMU
Filter Cartridge
M0-1056
Electronic Air Cleaner
GSAS
Electronic Air Cleaner
ASAS
Media Air Cleaner
GMU
Media Air Cleaner
AMU
Filter Cartridge
M0-1056
MaintainX CoPilot is your expert colleague, on call 24/7, helping your team find the answers they need to keep equipment running.
Reduce Unplanned Downtime
Ensure your team follows consistent procedures to minimize equipment failures and costly delays.
Maximize Asset Availability
Keep your assets running longer and more reliably, with standardized maintenance workflows from OEM manuals.
Lower Maintenance Costs
Turn any technician into an expert to streamline operations, maintain more assets, and reduce overall costs.
Thousands of companies manage their assets with MaintainX













