Goodman Gas Furnace AMSS961005CNAA

Turn on the furnace at the thermostat

Wait a few minutes for dust to settle

Check the burner flames for the following characteristics

Are the flames stable, quiet, soft and blue with slightly orange tips?

Do the flames extend directly outward from the burner ports without curling downward, floating or lifting off the ports?

Ensure all other gas appliances are turned off

Wait for at least fifteen minutes after the heating cycle has started

Clock the gas meter to determine the time for one complete revolution of the cubic foot dial

Enter the time recorded for one complete revolution (in seconds)

Enter the calorific value of the gas (BTU per cubic foot)

Calculate the cubic feet of gas consumed per hour

Check that the new or cleaned filter is properly installed

Ensure the air cleaner is installed in the correct position

Is the air cleaner readily accessible for inspection?

Electronic Air Cleaner Inspection

Inspect and clean the following components

Inspect and replace the Media Air Cleaner filter cartridge if necessary

Check availability of Carbon Filters

Disconnect all power before servicing or installing the unit

Check the following furnace components for proper working order

Was the ignitor handled with care?

Describe any issues found with the ignitor

Were all necessary repairs or services performed?