

Turn manuals into instant answers
with your AI-powered assistantTurn manuals into instant answers
with your AI-powered assistant
Get instant access to all the maintenance information you need. Empower technicians to perform preventive maintenance with asset packages, ready to use right out of the box.
Find all the essential guides in one place.
Tensioning Guide
Belt-diagram
C-120 pulleys
+ 13 more
Pre-built workflows to keep your asset running smoothly.
Daily Electrical System Inspection
Replace Roller and Pulley
Install Engine B-120
+ 29 more
Integrate maintenance plans directly into your work orders.
Motion Industries
Applied Industrial Technologies
Electrical Brothers
+ 5 more
Access the parts list for your equipment in MaintainX.
Drive Motor
B2 Rollers
Tensioning System
+ 40 more

Untes Air Cooled Scroll Chiller TCAEBY 4290
Create an account to install this asset package.
Integrate maintenance plans directly into your work orders in MaintainX.
6 Monthly Unit Inspection
General Cleaning
Clean the unit using a moist cloth
Unit Condition Inspection
Inspect the general conditions of the unit
Check for corrosion on the unit framework
6 Monthly Compressor Oil Check
Pre-Inspection
Ensure the compressor is running before inspection
Oil Level Inspection
Record the oil level in the sight-glass
Is the oil level visible through the sight-glass?
Is there a prolonged and excessive presence of foam during operation?
Post-Inspection
Is the oil level within the normal range?
Document any abnormalities observed during the inspection
Refrigerant Charge Replacement
Preparation
Ensure all necessary equipment is available
Verify the amount of gas required from the serial no. plate
Evacuation and Cleaning
Drain and evacuate the circuit to remove non-condensable gases
Wash the refrigerant system thoroughly before restoring gas charge
Refrigerant and Oil Restoration
Restore the exact amount of new oil as per the serial no. plate
Restore the exact amount of refrigerant as per the serial no. plate
Fan Grille Inspection
Safety Precautions
Ensure all fans are turned off before inspection
Do not remove protective grilles under any circumstances
Inspection of Fan Grilles
Check that the fan grilles are clear from obstructions
Is there any visible damage to the fan grilles?
Post Inspection
Describe any issues found during inspection
Was the inspection completed without removing any grilles?
Compressor Oil Level Adjustment
Preparation
Switch off the unit
Check the oil level in the compressors
Oil Level Check with Unit On
Switch on the unit
Verify oil level visibility through the sight-glass
Oil Topping-Up Procedure
Pump-out the compressors
Top-up the oil using the pressure connection on the compressor inlet
MaintainX CoPilot is your expert colleague, on call 24/7, helping your team find the answers they need to keep equipment running.
Reduce Unplanned Downtime
Ensure your team follows consistent procedures to minimize equipment failures and costly delays.
Maximize Asset Availability
Keep your assets running longer and more reliably, with standardized maintenance workflows from OEM manuals.
Lower Maintenance Costs
Turn any technician into an expert to streamline operations, maintain more assets, and reduce overall costs.
Thousands of companies manage their assets with MaintainX













